Service Guide

Server System Features
20 Intel
®
Server System R1000RP Service Guide
Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the motherboard and the
system drives. The following diagrams show the location for each connector found on the
backplane.
4 x 3.5-inch Hard Drive Backplane
A
SAS/SATA Hot-swap Connectors
Figure 14. 4 x 3.5-inch Hard Drive Backplane Components (Front View)
A
Power Connector
B
SGPIO Connector
C
I
2
C Connector
D
SATA Connectors
Figure 15. 4 x 3.5-inch Hard Drive Backplane Components (Rear View)
8 x 2.5-inch Hard Drive Backplane
A
SAS/SATA Hot-swap Connectors
Figure 16. 8 x 2.5-inch Hard Drive Backplane Components (Front View)