Service Guide

Server Utilities
Intel
®
Server System R1000RP Service Guide 127
Help Text: View/Edit IPv6 Prefix Length from zero to 128 (default 64). Press
<Enter> to edit.
Comments: This specifies the IPv6 Prefix Length for the Intel
®
RMM4 DMN LAN.
There is a separate IPv6 Prefix Length field for the Baseboard LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto)
or can be edited (when Static).
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
19. BMC DHCP Host Name
Option Values: [Entry Field, 2-63 characters]
Help Text: View/Edit BMC DHCP host name. Press <Enter> to edit. Host name
should start with an alphabetic, remaining can be alphanumeric characters. Host name length
may be from 2 to 63 characters.
Comments: This field is active and may be edited whenever at least one of the IP
Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from
which dynamically assigned IPv4 or IPv6 addressing parameters are acquired.
The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The
user can edit the existing Host or enter a different DHCP Host Name.
If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field
will be grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
20. User ID
Option Values: anonymous
root
User3
User4
User5
Help Text: Select the User ID to configure: User1 (anonymous), User2 (root), and
User3/4/5 are supported.
Comments: These 5 User IDs are fixed choices and cannot be changed. The BMC
supports 15 User IDs natively but only the first 5 are supported through this interface.
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
21. Privilege
Option Values: Callback
User
Operator
Administrator
Help Text: View/Select user privilege. User2 (root) privilege is "Administrator" and
cannot be changed.
Comments: The level of privilege that is assigned for a User ID affects which
functions that user may perform.