Service Guide

Server Utilities
114 Intel
®
Server System R1000RP Service Guide
If the OS watchdog timer is enabled, this is the system action taken if the watchdog timer
expires.
[Reset] - System performs a reset.
[Power Off] - System powers off.
Comments: This option is grayed out and unavailable when the O/S Boot Watchdog
Timer is disabled.
Back to [Server Management Screen] — [Screen Map]
11. OS Boot Watchdog Timer Timeout
Option Values: 5 minutes
10 minutes
15 minutes
20 minutes
Help Text: If the OS watchdog timer is enabled, this is the timeout value BIOS will
use to configure the watchdog timer.
Comments: This option is grayed out and unavailable when the O/S Boot Watchdog
Timer is disabled.
Back to [Server Management Screen] — [Screen Map]
12. Plug & Play BMC Detection
Option Values: Enabled
Disabled
Help Text: If enabled, the BMC will be detectable by OSes which support plug and
play loading of an IPMI driver. Do not enable this option if your OS does not support this
driver.
Comments: This option controls whether the OS Server Management Software will
be able to find the BMC and automatically load the correct IPMI support software for it. If your
OS does not support Plug & Play for the BMC, you will not have the correct IPMI driver
software loaded.
Back to [Server Management Screen] — [Screen Map]
13. EuP LOT6 Off-Mode
Option Values: Enabled
Disabled
Help Text: Enable/disable Ecodesign EuP LOT6 “Deep Sleep” Off-Mode for near-
zero energy use when powered off.
Comments: This option controls whether the system goes into Deep Sleep or more
conventional S5 Soft-Off when powered off. Deep Sleep state uses less energy than S5 but S5
can start up faster and can allow a Wake on LAN action (which cannot be done from a Deep
Sleep state).
This option will not appear on platforms which do not support EuP LOT6 Off-Mode.
Back to [Server Management Screen] — [Screen Map]
14. Console Redirection
Option Values: <None>
Help Text: View/Configure Console Redirection information and settings.