Service Guide

Server Utilities
Intel
®
Server System R1000RP Service Guide 109
Comments: Information only. Shows the current TPM device state.
A Disabled TPM device does not execute commands that use the TPM functions and TPM
security operations are not available.
An Enabled & Deactivated TPM is in the same state as a disabled TPM, except that setting of
the TPM ownership is allowed if it is not present already.
An Enabled & Activated TPM executes all commands that use the TPM functions and TPM
security operations are also available.
Note: This option appears only on boards equipped with a TPM.
Back to [Security Screen] — Back to [Screen Map]
8. TPM Administrative Control
Option Values: No Operation
Turn On
Turn Off
Clear Ownership
Help Text:
[No Operation] - No changes to current state.
[Turn On] - Enables and activates TPM.
[Turn Off] - Disables and deactivates TPM.
[Clear Ownership] - Removes TPM ownership & returns TPM to factory default state.
Note: Setting returns to [No Operation] on every boot.
Comments: Any Administrative Control operation selected will require the system to
perform a Hard Reset in order to become effective.
Note: This option appears only on boards equipped with a TPM.
Back to [Security Screen] — Back to [Screen Map]
Server Management Screen (Tab)
The Server Management screen allows the user to configure several server management features.
This screen also provides an access point to the screens for configuring Console Redirection,
displaying system information, and controlling the BMC LAN configuration.
To access this screen from the Main screen or other top-level Tab screen, press the right or left
arrow keys to traverse the tabs at the top of the Setup screen until the Server Management screen
is selected.