Service Guide

54 Intel® Server Board S1200BT Service Guide
BMC LAN Configuration
The BMC configuration screen allows the Setup user to configure the BMC Baseboard
LAN channel and the RMM4 LAN channel, and to manage BMC User settings for up to
five BMC Users.
To access this screen from the Main screen, select Server Management > System
Information. To move to another screen, press the <Esc> key to return to the Server
Management screen, then select the desired screen.
The BMC LAN Configuration screen is unusual in that the LAN Configuration
parameters are maintained by the BMC itself, so this screen is just a User Interface to the
BMC configuration. As such, the initial values of the LAN options shown on the screen
are acquired from the BMC when this screen is initially accessed by a user. Any values
changed by the user are communicated back to the BMC when a “Save Changes” or “Save
Changes and Exit” action is performed. If a “Discard Changes” or “Discard Changes and
Exit” action is performed instead, any accumulated changes from this screen will be
disregarded and lost.
Figure 24. BMC LAN Configuration Screen (S1200BTL//S1200BTLRM)