Service Guide

Intel® Server Board S1200BT Service Guide 41

Option Values:None

Help Text:Shows the name of the Storage Module detected, if one is installed.

Comments:Information only

. If no Storage module is detected, then “None” is displayed.

— This shows the customer the product name of the module installed, which helps

in identifying drivers, support, documentation, etc by listing this on the BIOS

screen.

When an AXX4SASMOD Storage Module is detected, then (and only then) a following

option will be available for switching between IT/IR and ESRT2 RAID settings.

5. Configure AXX4SASMOD RAID Module

Option Values:IT/IR

Intel

ESRT2 (LSI(TM))

Help Text:

— IT/IR: Provides pass-through drive support as well as HW RAID 0/1/1e support.

Uses LSI(TM) mpt drivers.

—Intel

ESRT2 (Powered by LSI(TM)): Supports RAID 0/1/10 and optional

RAID 5 with Intel

Embedded Server RAID Technology 2 (ESRT2). Uses

Intel

ESRT2 drivers (based on LSI(TM) MegaSR).

Comments:This option setting only appears when an AXX4SASMOD Storage Module is

installed. If a RAID Volume has not previously been created, it will be necessary to Save

and Exit and reboot in order to create a RAID Volume.

6. SATA Port

Option Values:Not Installed

Help Text:

(Ports 0-1): 6Gb SATA capable port

(ports 2-5): 3Gb SATA capable port

Comments:Information only

. This is repeated for all 6 SATA Port for the Onboard SATA

Controller. This section for SATA Drive Information does not appear when the SATA

Mode is RAID Mode.

Serial Port Configuration

The Serial Port Configuration screen allows the user to configure the Serial A [COM 1]

and Serial B [COM2] ports.