Intel Application Accelerator User's Manual

Uninstalling the Intel Application Accelerator

If System Does Not Have Intel RAID Application Accelerator Option ROM Installed:

d. Enter the system BIOS Setup (usually done by pressing a key such as 'F2' or 'Delete'

during boot-up)

e. Change the IDE configuration for the RAID-controlled hard drive(s) from 'RAID' to

'IDE'.

3. Delete any partitions on the hard drives that were previously connected to the RAID

controller

4. Reinstall the operating system

Note: If you experience any difficulties making these changes to the system BIOS, please contact the

motherboard manufacturer or your place of purchase for assistance.

74 User's Manual