Technical Product Specification

Product Overview Intel® Server System R1304BTSSFAN/ R1304BTLSFAN/ R1304BTLSHBN TPS
2.4
System Boards
The Intel
®
Server Systems R1304BTSSFAN, R1304BTLSFAN, and R1304BTLSHBN include
system boards used as internal interconnects and provide feature accessibility. The following
section provides a brief description for each.
2.4.1
Intel
®
Server System R1304BTSSFAN
The Intel
®
Server System R1304BTSSFAN includes an Intel
®
Server Board S1200BTS. This
board supports a PCI Express* riser card.
 PCI Express* Riser Card – Supports a single, low-profile x8 PCI Express* riser card.
2.4.2
Intel
®
Server System R1304BTLSFAN
The Intel
®
Server System R1304BTLSFAN includes an Intel
®
Server Board S1200BTL. This
board supports a PCI Express* riser card.
 PCI Express* Riser Card – Supports a single, low-profile x8 PCI Express* riser card.
2.4.3
Intel
®
Server System R1304BTLSHBN
The Intel
®
Server System R1304BTLSHBN includes an Intel
®
Server Board S1200BTL. This
board supports one riser card option. The Intel
®
Server System R1304BTLSHBN supports a
hot-swap SATA/SAS backplane with four SATA/SAS drives.
 PCI Express* Riser Card –Supports a single, low-profile x8 PCI Express* riser card.
2.5
System Cooling
The Intel
®
Server Systems R1304BTSSFAN, R1304BTLSFAN, and R1304BTLSHBN provide
three non-redundant system cooling fans. When external ambient temperatures remain within
specified limits, the cooling system provides sufficient airflow for all drive configurations,
processors, supported memory, and add-in cards.
2.6
Rack and Cabinet Mounting Options
The server systems are designed to support 19-inch wide by up to 30-inch deep server cabinets.
The server systems support the following rack mount option:
 Slide rail kit (Product order code – AXXVRAIL): Designed to mount the chassis into a
standard (19-inch by up to 30-inch deep) EIA-310D compatible server cabinet.
CAUTION: THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS CAN
BE FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm.
EXCEEDING THE MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE
SERVER MAY RESULT IN FAILURE OF THE RACK RAILS HOLDING THE SERVER. Use of a
mechanical assist to install and align server into the rack rails is recommended.
Revision 2.4
8