Service Guide

Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide 29
Installing the Server System Cover
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii.
2. Place the cover over the server system so that the side edges of the cover sit just
inside the server system side-walls. Slide the cover forward. See letter “A” in
Figure 13.
3. Install the three screws at the front of the server and one screw at the end of the
server. See letter “B” in Figure 13.
Figure 13. Installing the Server System Cover
4. Reconnect all peripheral devices and the AC power cord.
AF003703
A
A
B
Recessed
Edge