Service Guide

Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide 7
Peripheral Devices (R1304BTSSFAN/R1304BTLSFAN)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
• Slimline Optical Drive Bay
• Hard Disk Drive Bay HDD0/HDD1/HDD2/HDD3
Peripheral Devices (R1304BTLSHBN)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
• Slimline Optical Drive Bay
• Four Hard Disk Drive Bays
Hard Disk Drives
The Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN provides
six SATA ports.
For instructions on installing hard drives, see “Installing and Removing a Hard Drive
(R1304BTSSFAN/R1304BTLSFAN)” on page 42 on Page 41.
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a
maximum ambient temperature of 45
°C.
Note: The Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN does not
support all Serial ATA (SATA) hard drives. See
“Server System References” on page xi on
Page x for an Internet link to a list of supported hardware.
Slimline Optical Drive Carrier
One slimline drive carrier is included with your server system; you must purchase the
optical drive separately. To use the slimline DVD drive provided by Intel, use order code
AXXSATADVDROM. To use the slimline DVD CD-ROW drive provided by Intel, use
order code AXXSATADVDRWROM.
Note: The Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN does not
support all slimline optical drives. See
“Server System References” on page xi for an
Internet link to a list of supported hardware. Intel provides accessory kits for these drives.
For installation instructions for an optical drive, see “Removing a Slimline Optical Drive”
on page 51.