Service Guide

10 Intel® Server Board S1200BT Service Guide
Configuration Jumpers
Jumper Name Pins What happens at system reset…
J1H3: Protected RTC
(CMOS clear)
1-2 These pins should have a jumper in place for normal system
operation. (Default)
2-3 If these pins are jumpered with AC power plugged, the CMOS
settings are cleared within five seconds. These pins should not be
jumpered for normal operation.
J1J2: ME Force Update 1-2 ME Firmware Force Update Mode – Disabled (Default)
2-3 ME Firmware Force Update Mode – Enabled