Intel Matrix Storage Console Reference Content

7. Select a hard drive to be used as the recovery hard drive for the recovery volume, as
shown in the following screen shot.
8. Select an update policy. In Continuous mode, data on the master drive is copied to the
recovery drive automatically as long as both drives are connected to the system. In
Update on request mode, data on the master drive is copied to the recovery drive on your
request.
9. Click Finish to create the recovery volume.
How do I rebuild a degraded RAID volume after a failed drive is
replaced?
After replacing a failed hard drive from a redundant RAID volume (RAID 1/5/10), use the following
steps to rebuild the volume.
1. Power on the system.
2. Click Start.
3. Click All Programs.
4. Click Intel® Matrix Storage Manager.
5. Click Intel® Matrix Storage Console.
6. Click on the View menu and select Advanced Mode.
7. Right-click on the non-RAID hard drive in the device tree and select Rebuild to this Hard
Drive.
How do I disable the data protection balloon?