Intel Application Accelerator User's Manual

Intel Application Accelerator RAID Option ROM

13.3.4 Reset Disks to Non-RAID

Warning: By performing this operation, all data on the RAID drives and any internal RAID structures will be lost.

1. Select option 3 ‘Reset Disks to Non-RAID’ and press the <Enter> key to delete the RAID

volume and remove any RAID structures from the drives and the following window will

appear:

Note: Possible reasons to ‘Reset Disks to Non-RAID’ could include issues such as incompatible RAID

configurations or a failed volume or failed disk.

2. Select the hard drives that should be reset by using the [SPACE] bar to select. A green arrow

will appear immediately to the left of the hard drives once they have been selected similar to the

following:

3. Press the <ENTER> key to complete the selection.

4. Confirm the selection by pressing the <Y> key.

User's Manual 45