User Guide

48 Intel® Integrated RAID Solution User Guide
0x01 – FAILURE: Bad command-line arguments or operational failure.
0x02 – ADAPTER_NOT_FOUND: Cannot find specified adapter.
LOCATE
The LOCATE command locates a specific drive in a volume by turning on its location
indicator and flashing its LED. The command works only for drives installed in a disk
enclosure. It does not work for drives attached directly to the controller.
Command Line
sas3ircu <controller_#> locate <Enclosure:Bay> <action>
Parameters
• <controller_#> – The index of the controller with the drives that you need to
locate.
• <Enclosure:Bay> – The enclosure and bay number of the drive.
• <action> – The possible actions are as follows:
— ON – Turn on the location indicator of the drive.
— OFF – Turn off the location indicator of the drive.
Program Return Value
0x00 – SUCCESS: Command completed successfully.
0x01 – FAILURE: Bad command-line arguments or operational failure.
0x02 – ADAPTER_NOT_FOUND: Cannot find specified adapter.
LOGIR
The LOGIR command uploads or clears the Integrated RAID log information.
Command Line
sas3ircu <controller_#> logir <action> [filename] [noprompt]
Parameters
• <controller_#> – The index of the controller with the logs that you need to
upload or clear.
• <action> – The possible actions are as follows: