User Guide

46 Intel® Integrated RAID Solution User Guide
Volume wwid : 0e2ca3c68dc5dc20
Physical disk I/Os : Not quiesced
SAS3IRCU: Command STATUS Completed Successfully.
SAS3IRCU: Utility Completed Successfully.
The possible values for the fields in the status data are as follows:
• Current operation: Synchronize, Consistency Check, OCE, Background Init, or None
• Volume status: Enabled or Disabled
• Volume state: [Inactive] Optimal, Degraded, Missing, or Failed
• Physical disk I/Os: Quiesced or Not quiesced
LIST
The LIST command displays a list of all controllers present in the system, along with each
corresponding controller index. You need the controller index as an input parameter for
other SAS3IRCU commands.
Command Line
sas3ircu list
Parameters
None.
Program Return Value
0x00 – SUCCESS: Command completed successfully.
0x01 – FAILURE: Command failed.
0x02 – ADAPTER_NOT_FOUND: Cannot find specified adapter.
Sample Output
Following is an example of the output of the LIST command. The format and fields in the
output vary depending on the types of installed controllers.
Adapter Vendor Device SubSys SubSys
Index Type ID ID Pci Address Ven ID Dev ID
----- --------- ------ ------ ---------------- ------- ------
0 SAS3008 1000h 72h 00h:01h:00h:00h 1000h 00dah
1 SAS3008 1000h 72h 00h:05h:00h:00h 1000h 00dah