Intel® RAID Controller RS3UC080 User Guide Intel Order Number: H14966-002
DISCLAIMER IINFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen.
重要安全指导 在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。 和/或 http://support.intel.com/support/motherboards/server/sb/CS-010770.
Warnings Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide.
vi Intel® RAID Controller RS3UC080 User Guide
Preface This is the primary user guide for the Intel 12Gb/s SAS Controller. It contains installation instructions and specifications. Audience The people who benefit from this document are: • Engineers who are designing an Intel 12Gb/s SAS Controller. • Anyone installing an Intel 12Gb/s SAS Controller. Organization This document includes the following chapters: • • • • Chapter 1 provides a general overview of the Intel 12Gb/s SAS Controller.
viii Intel® RAID Controller RS3UC080 User Guide
Table of Contents Safety Information ..................................................................................................... iii Important Safety Instructions ................................................................................................ iii Wichtige Sicherheitshinweise ............................................................................................... iii Consignes de sécurité .......................................................................................
x Intel® RAID Controller RS3UC080 User Guide
List of Figures Figure 1. Intel® RAID Controller RS3UC080 Board Layout ...................................................... 6 Figure 2. Install an Intel 12Gb/s x8 Controller in a PCIe Slot ..................................................
xii Intel® RAID Controller RS3UC080 User Guide
List of Tables Table 1. Intel SAS 12 Gb/s SAS Performance ..........................................................................
xiv Intel® RAID Controller RS3UC080 User Guide
1 Overview The Intel® PCI Express® (PCIe®)-to-Serial Attached SCSI (SAS) Controller, referred to as the Intel 12Gb/s SAS Controller, provides high-performance internal storage connectivity for servers and workstations. The Intel 12Gb/s SAS Controller provides eight lanes of 12Gb/s SAS connectivity and is matched with eight lanes of PCIe 3.0 8GT/s performance.
2 Features This section lists the Intel 12Gb/s SAS Controller features: • • • • • • • Implements one LSI* SAS 3008 eight-port 12Gb/s SAS to PCIe 3.0 controller Supports eight-lane, full-duplex PCIe 3.
3 Functional Descriptions PCI Express Interface PCIe is a high-speed standard local bus for point-to-point interfacing of I/O components to the processor and the memory subsystems in high-end computers and servers. The LSI* SAS 3008 controller chip contains the PCIe functionality for the Intel 12Gb/s SAS Controller. The LSI* SAS 3008 controller chip connects to the PCIe bus and generates timing and protocol in compliance with the PCIe specifications.
4 Operating System Support The Intel 12Gb/s SAS Controller supports all major operating systems: Windows*, Linux Red Hat*, Linux SUSE* Enterprise Server (SLES), Solaris*, and VMware*. Refer to http://www.intel.com/support for details on the software versions and device driver support. For Solaris support, contact the Intel Technical Support team. Note: The Intel 12Gb/s SAS Controller also supports the Solaris 10 Update 11 and Solaris 11 Update 1 operating systems.
5 Intel® RAID Controller RS3UC080 Characteristics Memory The Intel 12Gb/s SAS Controller provides one 4-M × 16-bit Flash ROM to store the firmware and the BIOS. The Intel 12Gb/s SAS Controller can provide up to 32 K × 8-bit NVSRAM for storing nonvolatile RAID information when a system failure occurs or to reflash the board to run IR firmware. LED The Intel 12Gb/s SAS Controller Heartbeat LED, CR1, blinks green to indicate the controller is capable of general activity. Connectors PCIe Connector (EC1).
Ports 0, 1, 2, 3 Ports 4, 5, 6, 7 Figure 1. Intel® RAID Controller RS3UC080 Board Layout • EC1 – PCIe x8 board edge connector • CR1 – Heartbeat LED • J1 – SFF-8643 mini-SAS HD, internal, right-angle connectors Electrical Characteristics The maximum power requirements for the Intel® RAID Controller RS3UC080 under normal operation are as follows: • PCIe 12.0 V = 1.59 A • Power values: — Nominal = 13.0 W — Worst case = 19.
• Minimum airflow: 200 linear feet per minute The following limits define the storage and transit environment for the Intel 12Gb/s SAS Controller: • Temperature range: –45°C to +105°C (–49°F to +221°F) (dry bulb) • Relative humidity range: 5% to 90% noncondensing Intel® RAID Controller RS3UC080 User Guide 7
6 Intel 12Gb/s SAS Controller Certifications and Safety Characteristics All Intel 12Gb/s SAS Controllers meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe bus slot, all voltages are less than the SELV 42.4-V limit.
7 Hardware Detailed Installation Instructions To install the Intel 12Gb/s SAS Controller, follow these steps: 1. Unpack the controller, and inspect it for damage. Unpack the controller in a static-free environment. Remove the controller from the antistatic bag, and carefully inspect the device for damage. If you notice any damage, contact Intel or your reseller support representative. Caution: To avoid the risk of data loss, make a backup of your data before changing your system configuration. 2.
Figure 2. Install an Intel 12Gb/s x8 Controller in a PCIe Slot 6. Secure the controller bracket to the system’s chassis. Install the bracket screw, if applicable, or engage the system retention mechanism to secure the controller to the system’s chassis. 7. Connect SAS cables between the controller and the SAS backplane or any other SATA or SAS device. The Intel 12Gb/s SAS Controller has two SFF-8643, internal x4, mini-SAS HD connectors.
