User Guide

Intel® Integrated RAID Solution User Guide 37
Table 1. SAS3IRCU Commands
The commands are not case sensitive. The individual command descriptions use the
following conventions:
• Replace text enclosed in < > with a required parameter.
• Replace text enclosed in [ ] with an optional parameter.
• Enter parameters enclosed in { } one or more times, as required for the command.
• Do not use the command-line definition characters < >, [ ], and { } on the command
line.
Common Command-Line Parameters
This section describes command-line parameters that are common to more than one
command.
• <controller_#>
The unique controller number that the program assigns to each PCI function found
on supported controller chips in the system, starting with controller # 0. For
example, in a system containing two LSISAS3008 controllers, controller # 0
references the first controller and controller # 1 references the other controller. Use
the
LIST command to view a list of controllers connected to the system and the
controller number for each controller.
SAS3IRCU
Command
Operating System
DOS Linux EFI FreeBSD
CREATE X X X X
DELETE X X X X
DELETEVOLUME X X X X
DISPLAY X X X X
HOTSPARE X X X X
LIST X X X X
STATUS X X X X
CONSTCHK X X X X
ACTIVATE X X X X
LOCATE X X X X
LOGIR X X X X
BOOTIR X X X X
BOOTENCL X X X X
HELP X X X X