Hardware User Guide

35 12Gb/s Intel® RAID Controllers User Guide
Intel
®
RAID Module RMS3CC080
The Intel
®
RAID Module RMS3CC080 is an LSI* SAS3108 ROC based SATA+SAS
RAID controller that controls four internal SAS/SATA ports through one SFF-8643
internal mini-SAS HD-4i connector.
The Intel
®
RAID Module RMS3CC080 is a PCI-Express* (PCIe*) 3.0 RAID adapter with
a mezzanine port that is a custom 80-pin connector capable of performance up to 8GT/s
per lane.
J1B1 3-pin header Premium Feature Key header.
Enables support for selected advanced
features, such as Recovery, CacheCade*,
FastPath, and SafeStore* disk encryption.
J1B2 2-pin connector Cache write pending header.
Connector for an LED mounted on the system
enclosure. The LED indicates that the data in
the cache has yet to be written to the storage
devices.
J1B3 2-pin connector Test header.
Reserved for use.
J1B4 4-pin connector On-board Serial Universal Asynchronous
Receiver/Transmitter (UART) connector.
Reserved for use.
J2B4 Standard edge card connector The interface between the RAID controller
and the host system.
Along with the PCIe interface, this connector
provides power to the board and an I
2
C
interface connected to the I
2
C bus for the
Intelligent Platform Management Interface
(IPMI).
J2L1 20-pin connector Remote RAID Maintenance Free Backup
Units connector (on the backside of the
controller).
Connects the remote RMFBU to the RAID
controller.
J4A1 80-pin connector Flash Module DDR3 Interface.
Connects the controller to a flash module.
J6B1 20-pin connector Local RAID Maintenance Free Backup Units
connector.
Connects the RMFBU directly to the RAID
controller.
Jumper/
Connector
Type Description