Hardware User Guide

27 12Gb/s Intel® RAID Controllers User Guide
Intel
®
RAID Controller RS3DC040 and RS3DC080
The Intel
®
RAID Controller RS3DC040 is a low-profile SAS+SATA RAID controller that
controls four internal SAS/SATA ports through one SFF-8643 internal mini-SAS HD-4i
connectors.
The Intel
®
RAID Controller RS3DC080 is a low-profile SAS+SATA RAID controller that
controls eight internal SAS/SATA ports through two SFF-8643 internal mini-SAS HD-4i
connectors.
Intel
®
RAID Controller RS3DC080 – Board Layout and Jumper and
Connector Information
This subsection provides the board layout, and the connector and jumper information for
the Intel
®
RAID Controller RS3DC0x0. The following figure shows the jumpers and the
connectors on the Intel
®
RAID Controller RS3DC080.
Note: The Intel
®
RAID Controller RS3DC040 is the same as the Intel
®
RAID Controller
RS3DC080 except that the J5A1 connector on the Intel
®
RAID Controller RS3DC040 is a
single internal port connector. The J5A1 connector on the Intel
®
RAID Controller
RS3DC080 is a dual internal port connector.
Note: Pin 1 on the headers and connectors is highlighted in red in this figure.
Figure 11. Card Layout for the Intel
®
RAID Controller RS3DC080
3_01679-01
J1A2
J2B4
J4B1
J1A4
J1B1
J5B1
J6B1
J6B5
J6B4
J6B6
J6B3
J6B2
J1A3
J6B7
J5A1
J3L1