Technical Product Specification

Intel® RAID Controller RS2WC080 and RS2WC040 TPS Hardware
Revision 1.0
Intel Order Number E64400-001
11
Figure 7 Jumpers and Connectors
Table 2 Jumpers and Connectors
Jumper Description Type
J3 Connects to external, green or red LEDs that
indicate drive activity or faults.
4-pin connector
J4 Ports 0–3 internal connector Connects the cables
from the controller to SAS drives or SATA II drives,
or a SAS expander.
X4 Mini-SAS (SFF-8087)
J5 Ports 4–7 internal connector Connects the cables
from the controller to SAS drives or SATA II drives,
or a SAS expander
Note: This connector is for RS2WC080 only.
X4 Mini-SAS (SFF-8087)
J6 x8 interface that provides connections on both the
top and the bottom of the board.
PCI* Express Gen 2 x8 board edge
connector
J7 PMI-style I2C connector
Supports SES (SCSI Enclosure Services) over I2C
over Internal I2C backplane cable.
3-pin connector
TP1 Universal Asynchronous Receiver/Transmitter
(UART) Reserved for factory use.
4-pin connector
U1 Reserved for factory use 2-pin connector