Hardware User's Guide

6 Intel® RAID Controller RS2VB080/RS2VB040 Hardware User’s Guide
Beep Codes
• Short beep (1 second on, 1 second off): Array has degraded but no data has been
lost.
• Long beep (3 seconds on, 1 second off): Array has failed and data has been lost.
• Short beep (1 second on, 3 seconds off): Using hot spare in rebuild; alarm will
continue during rebuild with a different sound at completion.
To disable the alarm, choose Disable Alarm. To enable the alarm, choose Enable Alarm
To disable the alarm only until the next event or until next power cycle, choose
Silence Alarm.