Hardware User's Guide

8 Intel® RAID Controller RS2PI008 Hardware User’s Guide

Figure 1. Installing the Intel

RAID Controller RS2PI008

5. Configure and install the SAS Devices, SATA II Devices, or both in the target

external storage case. Refer to the documentation of the devices for any

preinstallation configuration requirements.

6. Use SAS cables to connect the RAID controller to the target external storage case.

7. Install the server system cover and connect the power cords. For instructions, see

your server system documentation.

85040-01

Edge of

Motherboard

32-bit slots

(3.3 V)

PCIe

slot

Bracket Screw

64-bit slots

(3.3 V)

Press here