AXXRSBBU8 User Guide

Intel

RAID Smart Battery AXXRSBBU8 User’s Guide 7

Installing Directly on the RAID Controller

To install the Intel

RAID Smart Battery AXXRSBBU8 on the RAID Controller through

the J2 board-to-board connector (daughter card), do the following:

1. Ground yourself, and remove the Intel

RAID Smart Battery AXXRSBBU8 from the

package.

2. Make sure the three screws, and Phillips* screwdriver are easily accessible during the

following steps.

3. Remove the protective metal cover from the battery connector on the Intel

RAID

Controller.

4. Align the battery for your specific RAID controller by placing the Intel

RAID

Controller with the components facing up (see Figure 3).

Figure 3. Installing Directly on the Intel

RAID Controller

5. Hold the controller such that the battery side is up and the three screw holes are

aligned.

6. Carefully press the Intel

RAID Smart Battery AXXRSBBU8 onto the RAID

controller, so that the two connectors shown above in Figure 6 are firmly joined

AF003673

Battery