AXXRSBBU8 User Guide

4 Intel
®
RAID Smart Battery AXXRSBBU8 User’s Guide
Remote Extender Board (REB)
The REB component is a small daughter card that mounts directly to the base controller
through the board-to-board connector J2 and is secured by one screw. It provides a 20-pin
battery connector J1 for remote battery installation support for base controllers that do not
have a 20-pin connector on the controller. The REB is included in the RAID controller
product kit.
Figure 2. Remote Extender Board
Remote Battery Connecting Cables
A 20 inch 20-pin cable is provided in the battery kit to remotely connect the Intel
®
RAID
Smart Battery AXXRSBBU8 to the RAID controller, or to a REB which is mounted on
the RAID controller. Intel recommends mounting the battery remotely from the RAID
controller when possible to provide additional cooling.
AF003672
J1
J2
C1
CB1 RB2
RB3
RB4
RB1
RB5
CB7
CB6
CB2 CB3 CB4 CB5
C2 C3
R4 R3 R2 R1
TRACER
ASSY
AXXRSBBU8(Top View)
AXXRSBBU8(Bottom View)