Installation Guide

Intel

RAID Smart Battery AXXRSBBU7 User’s Guide 3

2 Installing the Hardware

The battery pack is mounted on a daughter card, which is then attached to the RAID

controller either locally or remotely. Figure 1 displays the top and bottom views of the

Intel

RAID Smart Battery AXXRSBBU7. The J5 connector (see letter “B” for the

location of this connector) plugs into the Intel

RAID Controller. The J2 connector (see

letter “C” for the location of this connector) supports remote connection to an Intel

RAID Controller. Only the top side of the daughter card is visible after it is installed on

the RAID controller.

Figure 1. Top and Bottom View of the Intel

RAID Smart Battery AXXRSBBU7

AXXRSBBU7 (bottom view)

AXXRSBBU7 (top view)

AF003200

A. J4 Battery Pack Harness Connector

B. J5 Board-to-board Connector

C. J2 Remote BBU Connector

D. Battery Pack Harness