AXXRSBBU7User's Guide

4 Intel
®
RAID Smart Battery AXXRSBBU7 User’s Guide
Remote Extender Board (REB)
The REB component is a small daughter card that mounts directly to the base controller
through the board-to-board connector J2 and is secured by one screw. It provides a 20-pin
battery connector J1 for remote battery installation support for base controllers that do not
have a 20-pin connector on the controller. The REB is included in the RAID controller
product kit.
Figure 2. Remote Extender Board
Remote Battery Connecting Cables
A 20 inch 20-pin cable is provided in the battery kit to remotely connect the Intel
®
RAID
Smart Battery AXXRSBBU7 to the RAID controller, or to a REB which is mounted on
the RAID controller. Intel recommends mounting the battery remotely from the RAID
controller when possible to provide additional cooling.
Table 1. Cable Compatability
Intel
®
RAID Controller or
Server System
20-inch Cable
Intel
®
RAID Controller
RS2BL080
X (Requires the REB)
Intel
®
RAID Controller
RS2BL040
X (Requires the REB)
Intel
®
RAID Controller
RS2PI009
X