Hardware User's Guide

8 Intel® RAID Controller RS25SB008 Hardware User’s Guide
Figure 1. Changing the Bracket
4. Install the RAID controller into an available server system x8 or x16 PCI-Express*
slot (see Figure 2). To
locate an appropriate slot and for instructions on installing an
add-in card, see your server system documenta
tion.
Figure 2. Installing the Intel
®
RAID Controller RS25SB008
5. Configure and install the SAS/SATA Devices in the target external storage case.
Refer to the documentation of the devices
for any pre-installation
configuration requirements.
6. Use SAS cables to connect the RAID controller to the target external storage case.
Low-profile
Bracket
AF004149
PCI Express* Slot (3.3 V)
AF004150