Intel_RAID_HA_Solution_RHEL_WhitePaper

Intel® RAID High Availability Solution for Red Hat* Linux Systems White Paper Installation

Revision 1.0 Intel Confidential

2.6 Installation of Intel

HA RAID Drivers and Intel

RAID Web Console 2

So that each node in the cluster that will be created can access the shared JBOD storage, the

Intel

ir3 2208 HA RAID drivers must be installed into each node of the cluster. If this driver has

been loaded during Linux OS installation, the following steps 1 to 4 can be ignored.

1. Check whether other version ir3 2208 RAID driver has been installed on each node of

cluster by running the following command:

lsmod |grep mega

If “megaraid_sas” is listed, other version ir3 2208 RAID driver has been installed.

2. Run the following command to remove the other version ir3 2208 RAID driver if it has

been installed on Linux:

rmmod megaraid_sas

3. Run the following command to copy the ir3 2208 HA driver RPM package to any folder

of Linux OS:

rpm –ivh [ir3 2208 HA driver rpm package]

4. Run the following command to insert new version driver module:

modprobe megaraid_sas