Hardware User's Guide

Edge of
Motherboard
32-bit slots
(3.3 V)
PCIe
slot
Bracket Screw
64-bit slots
(3.3 V)
Press here
Press here
AF003857
6 Intel® SAS Controller RS25GB008 Hardware User’s Guide
Figure 1. Installing the Intel
®
SAS Controller RS25GB008
5. Configure and install the SAS Devices, SAT
A II Devices, or both in the target
external storage case. Refer to the documentation of the devices for any
preinstallation configuration requirements.
6. Use SAS cables to connect the SAS controller
to the target external
storage case.
7. Install the server system cover and connect the
power cords. For instructions, see
your server system documentation.
Replacing a Controller
To replace the SAS controller, see your server system documentation for instructions to
remove and then install an add-in adapter.