Product Data Sheet / Brochure

7 VBUS 17 Ground

8 CC1 18 D-

9 SBU1 19 D+

10 SBU2 20 CC2

D - 20pin Common IO Header

The 20pin Common IO Header utilizes a “Molex Micro-Lock” or equivalent 1.25mm pitch

connector which contains signals for the following types of headers.

2x USB 2.0 4 Pin Headers

1x 8pin Internal Dual PWM Fan Header

1x 10pin Front Panel Header (Power LED and Button)

Molex Micro-Lock equivalent

Number

Signal

Number

Signal

1 USB_VBUS 2 GND

3 USB1_N 4 USB2_P

5 USB1_P 6 USB2_N

7 GND 8 USB_VBUS

9 GND 10 PWR_LED_P

11 PWR_BTN_N 12 PWR_LED_N

13 +12V_Slot 14 GND

15 FAN_PWM1 16 FAN_PWM2

17 FAN_TACH1 18 FAN_TACH2

19 GND 20 +12V_Slot

*Note* that a fan-out cable is included that adapts the 20pin Common IO cable assembly into the

individual headers listed below. Pin 13 and Pin 20 are powered by the +12V Slot power that is

produced by an Element compatible baseboard design. If not connected to a baseboard these

two FAN PWM headers capabilities are non-functional. Fan selection should use designs with less

than 1A of power required.

2x USB 2.0 4 pin Header

Molex part number 53398-0471, 1.25mm Pitch PicoBlade* Header, Surface Mount, Vertical, Lead-

Free, 4 Circuits.

USB 2.0 Header Pin

Number

Pin Definition - Signal

1 +5V DC power

2 D – Data

3 D + Data

4 Ground

Internal 8pin Dual PWM Fan header

Molex part number 53398-0867, 1.25mm Pitch PicoBlade* Header, Surface Mount, Vertical, Lead-

Free, 8 circuits.