Product Data Sheet / Brochure

2.16.1 Signal Tables for Headers and Connectors

This section more clearly defines the pinouts and connector types used in Table 7.

A – EPS 8 Pin Power Connector

The EPS 8 Pin Power Connector follows the ATX standard layout and requirements. With one

side being Ground and the opposite side with the connector lock being 12V. The NUC 11

Extreme Compute element can utilize 12-19V input, while the NUC 11 Extreme Kit provides the

standard ATX 12V.

B - Internal USB 3.1 Gen 2 Type-C 20pin Header (Key B)

C, Internal USB 3.1 Gen 2 Type-C 20pin

Header (Key B)

Pin Number Signal Pin Number Signal

1 Ground 11 Ground

2 TX1+ 12 TX2-

3 TX1- 13 TX2+

4 Ground 14 Ground

5 RX1+ 15 RX2-

6 RX1- 16 RX2+

7 Ground 17 Ground

8 D1+ 18 D2+

9 D1- 19 D2-

10 VBUS 20 VBUS

C - Internal USB 3.2 Gen 2 Type-C 20pin Header (Key A)

C, Internal USB 3.2 Gen 2 Type-C 20pin

Header (Key A)

Pin Number Signal Pin Number Signal

1 VBUS 11 VBUS

2 TX1+ 12 TX2+

3 TX1- 13 TX2-

4 Ground 14 Ground

5 RX1+ 15 RX2+

6 RX1- 16 RX2-