Product Data Sheet / Brochure

2
1.3 Feature Summary
Table 2 summarizes the major features of the Intel® NUC 11 Extreme Kits.
Table 2. Feature Summary
Form Factor
357
mm x
189
mm x
120
mm
Processor

Soldered
-
down Intel®
processor
o Integrated graphics
o Integrated memory controller
 The following processors are supported as intalled in the corresponding NUC 11 Extreme
Compute Element
o Intel® Core™ i9-11900KB
o Intel® Core™ i7-11700B
PCH
Intel®
WM590
Platform Controller Hub
Memory

Two
260
-
pin
1.2 V
DDR
4
SDRAM Small Outline Dual Inline Memory Module (SO
-
DIMM) sockets
 Support for DDR4 3200 MHz SO-DIMMs
 Support for 8 Gb and 16 Gb memory technology
†
 Support for up to 64 GB of system memory with two SO-DIMMs using 16 Gb memory
technology
†
 Support for non-ECC memory available on all SKUs
 Support for 1.2 V and 1.35 V low voltage JEDEC memory only
 Support for Intel® XMP memory profiles
 Note: 2 Gb memory technology (SDRAM Density) is not compatible
Graphics

Integrated graphics support for processors with Intel® Graphics Technology:
 One High Definition Multimedia Interface* (HDMI*) v2.0b back panel connector
 Two DisplayPort signals via USB Type C back panel connectors
Audio

Intel
®
High Definition (Intel
®
HD) Audio via the HDMI
and
Type C
interfaces through the
processor
 Realtek USB Audio via a stereo 3.5mm combination microphone/headphone on the front panel
Storage

NUC 11 Extreme
Compute
Element
:
 One PCIe Gen4 x4 NVMe M.2 2280.
 Two SATA 6.0 Gb/s or PCIe Gen3 x4 AHCI, NVMe ports are reserved for M.2 storage modules
supporting M.2 2242, M.2 2280 Note: Supports key type M (PCI Express* x1/x2/x4 and SATA),
 On the baseboard:
 One PCIe Gen4 x4 NVMe only port for M.2 modules supporting M.2 2280, or M.2 22110.
Peripheral
Interfaces

USB 3.
2
(Gen 2/10 Gbps) Type C
ports:
 Two ports are implemented via the back panel Type C connectors
 USB 3.2 (Gen 2/10 Gbps) Type A ports:
 Six ports are implemented via the back panel connectors (blue)
 Two ports via the desktop front panel (black)
 USB 2.0 ports:
 Two ports via two single-port internal 1x4 1.25 mm pitch headers (contained in the 20pin
Common IO Header)
 SD Card Reader:
 One UHS-II capable SDXC Card Reader on Front Panel
Chassis
Expansion
Capabilities

One PCIe
4
.0 x16 slot
*
with support for
a
dual slot GPU
up to ~
12
” (
300mm
) maximum length
 One PCIe 4.0 x4 slot* with support for full height cards up to ~8’’ (202mm) maximum length
 One M.2 4.0 x4 (NVMe only) on underside of chassis
 Note: PCIe 4.0 x16 slot will run in x8 mode if either M.2 x4 slot or PCIe x4 slot are used from
internal chassis baseboard
NUC Element
Expansion
Capabilities

T
hree
M.2 connectors supporting AHCI and NVME protocols
(only
Slot 1 and Slot 2
support
AHCI)
 Two Thunderbolt™ 4 via back panel Type C connectors
BIOS

Intel
®
BIOS resident in the Serial Peripheral Interface (SPI) Flash devic
e
 Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and System
Management BIOS (SMBIOS)
Wireless LAN

Intel® Wi
-
Fi 6
E
AX2
10
, 802.11ax, Dual Band, 2x2 Wi
-
Fi + Bluetooth 5
.2
 Maximum Transfer speed up to 2.4 Gbps