VMware ESXi 5.0 Installation and RWC2 Tips and Tricks White Paper

ESXi 5.0 Related RAID Operations
55
Figure 82. Installation Successfully
2.5.2 Install LSI Provider on VMware ESXi 5.0
1. The default status of the ESXi Shell is disabled as is shown in below figure.
Figure 83. Default ESXi Shell Status---Disabled
2. Press <Enter> key to enable the EXSi Shell.
Figure 84. Set ESXi Shell Status to Enabled
3. The default status of the ESXi SSH is disabled as is shown in below figure.
Figure 85. Default ESXi SSH Status---Disabled