Hardware User Guide
Table Of Contents
- Preface
- Table of Contents
- List of Figures
- List of Tables
- 1 Overview
- 2 Intel® Integrated RAID Module RMT3PB080 and RMT3CB080 Hardware Installation
- 3 Intel® Integrated RAID Module RMT3PB080 and RMT3CB080 Characteristics
- Appendix A: Drive Roaming and Drive Migration Install
- Appendix B: Installation/Assembly Safety Instructions
- Appendix C: Regulatory and Certification Information
30 Intel® Integrated RAID Module RMT3PB080 and RMT3CB080 Hardware User’s Guide
Table 6. LED Headers Pin-out
Figure 16. LED Header
Technical Specifications
Table 7. Technical Specifications
HDD Activity Header (J1A4)
Pin # Name Description
1 D_ACTIVE_PU 330V to P3V3_DUAL
2 D_ACTIVE_N Connected to Drain of onboard MFT
Specification
Intel
®
Integrated RAID Module RMT3PB080 and
RMT3CB080
RAID-on-Chip (ROC) LSISAS2208 Integrated ROC, 800 MHz
Operating voltage +3.3 V, +12 V
Card size RMT3PB080:
2.713 inch x 6.600 inch (Low-profile)
RMT3CB080:
See Intel
®
Integrated RAID Module Mechanical overview
Array interface to host Note: PCI Express* Revision 3.0 will be supported at post
launch.
SAS/SATA bus speed Up to 6 Gbps per port, point-to-point