Hardware User Guide

Intel® RAID Module RMS3JC080 User Guide 12
9. Connect SAS cables between the module and the SAS backplane or any other
SATA or SAS device. The Intel 12Gb/s SAS Module has two SFF-8643, internal
x4, mini-SAS HD connectors. Use cables with an internal mini-SAS HD connector
on one end (to connect to the module) and the appropriate connector on the other
end to attach to the backplane or SAS/SATA devices.
Figure 4. Connect the RAID Module to the SAS/SATA Devices
10. Replace the chassis’s cover, reconnect any power cords, and reconnect any network
cables. Turn on the power.
The hardware installation of your Intel 12Gb/s SAS Module is complete.
C
A
D
D
AF006534
B