Hardware User Guide

12Gb/s Intel® RAID Controllers User Guide 36
Intel
®
RAID Module RMS3CC080 – Board Layout and Jumper and
Connector Information
This subsection provides the board layout, and the connector and jumper information for
the Intel
®
RAID Module RMS3CC080. The following figure shows the jumpers and the
connectors on the Intel
®
RAID Module RMS3CC080.
Figure 14. Card Layout for the Intel
®
RAID Module RMS3CC080
The following table describes the jumpers and the connectors on the Intel
®
RAID Module
RMS3CC080.
Table 8. Jumpers and Connectors on the Intel
®
RAID Module RMS3CC080
Jumper/
Connector
Type Description
J1 Mezzanine connector (on the
backside of the module)
The PCIe* interface to the host system that is
implemented with a board-to-board
Mezzanine connector.
JT2 Dual x4 SAS Port 0 through Port 7
internal connector
Two SFF-8643 mini-SAS HD-4i internal
connectors.
Connects the controller by cable to SAS
drives or SATA drives.
JT3 Cache off-load connector Remote RAID Maintenance Free Backup Unit
connector (on the backside of the controller).
Connects the remote RMFBU to the RAID
controller.
AF006553
JT4
JT5
JT3
JT2
LSI SAS 3108
J1