VMware ESXi 5.0 Installation and RWC2 Tips and Tricks White Paper

ESXi 5.0 Related RAID Operations

3. Save the hosts file, and it is recommended to restart the system.

2.5.4 Use the RWC2 on client to control the RAID controller on server.

1. Double click the RWC2 and open it. Choose the “Display all the systems in the network of

local server”, uncheck “Stop discovery process of remote servers” and then click “Save

Settings” to save the configuration as is shown in below figure.

Figure 94. Configure the Display Preference

2. Enter the “IP Address” of the server in Intel

RAID Web Console 2 and click “Discover

Host” to search the host RAID Controller. The IP Address of the server will be returned,

double click the IP address of the server to connect the RAID controller.