Users Guide

1. Make sure that you are grounded and take the Intel
®
RAID Maintenance Free backup Unit
AXXRMFBU2 out of the package.
2. Verify that the RMFBU2 Cache Offload Module and SuperCap2 are installed in the plastic
bracket already.
3. Select a suitable cable from two cables provided for your system.
4. Carefully and lightly grasp the base of the cable. Make sure the yellow pin 1 of the cable is
in alignment with the yellow mark on the board connector. Press the connector with your
finger and insert with the connector parallel.
Figure 2. Connecting AXXRMFBU2 to the RAID Module
4 Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2 User’s Guide