Users Guide

Figure 8. Installing the Barrel Standoff
2. Attach the RAID to the matching server board connector, and press the module card firmly
to engage the barrel standoffs installed in step 1. Press down gently but firmly to ensure
that the card is properly seated in the connectors, and then insert the four pin standoffs into
the barrel standoffs respectively. The Intel
®
RAID Module RM25PB080 is shown for
illustrative purpose (see Figure 9).
Figure 9. Installing the Intel
®
Integrated RAID Module
3. Connect the proper cables into the adapter using the 4-port combined end. Make sure the
module and cables are properly attached and plug the cable into connector at the inside
edge of the adapter.
4. Tie together the RMFBU2 Cache-offload Module cable and the data cable with a provided
strap tie as shown in Figure 7.
Note: Please secure the cables with the strap tie to avoid unexpected RMFBU2 Cache-
offload Module cable detaching from the RAID module during the system transportation.
5. Install the server system cover back and connect the power cords. See your server system
documentation for instructions.
8 Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2 User’s Guide