GUID Partition Table (GPT) whitepaper

Backup
18
4. Backup
If you cannot install successfully with the above steps, you can try the following steps before
RAID and BIOS configuration. These steps will change your entire BIOS configuration to the
default configuration.
1. Press F2 when system POST to enter system BIOS
2. Press F9 or switch to Exit tab and select Load Default Values.
3. Click Yes when the screen displays:
“Load Optimized Defaults?”
Figure 31 Load Optimized Defaults
4. Press F10 to save and exit.
Click Yes when the screen displays: “Save Configuration and Reset?”