Hardware user guide

6 Intel® Integrated RAID Module RMS25KB0x0 and RMS25JB0x0 Hardware User’s Guide
Figure 1. Changing the Bracket
4. Install the RAID module into an available server system
x8 or x16 PCI-Express*
slot (see Figure 2). To locate an appropriate slot and for instructions on
installing an
add-in card, see your server system documentation.
Figure 2. Installing the Intel
®
Integrated RAID Module RMS25KB0x0
5. Connect the proper cables into the adapter u
sing the 4-port combined end. Make
sure the module and cables are properly attached and plug the cable into connector
at the inside edge of the adapter.
AF004665
Full-height
Bracket
AF004666
PCI Express* Slot (3.3 V)