Hardware user guide

Intel® Integrated RAID Module RMS25KB0x0 and RMS25JB0x0 Hardware User’s Guide 7
Note: To prevent throughput problems:
— Use the cables provided or use the
shortest possible cable.
— Do not use cables longer than one meter.
— Decrease the maximum length by one foot if
you are using a backplane.
— Do not use cross-over cables.
— Only connect to a SATA drive, SAS or SATA backplane, or an
expander device.
— Route the cables carefully.
— Check that the module and cables are all properly attached.
Figure 3. Connecting Cable between the RAID Module and Drives/Backplane
6. Install the server system cover and connect
the power cords. See your server system
documentation for instructions.
AF004667