Users Guide

Figure 6. Seating the RAID Module
3. Connect the proper cables into the adapter using the 4-port combined end. Make sure the
module and cables are properly attached and plug the cable into connector at the inside
edge of the adapter.
4. Tie the RMFBU2 Cache-offload Module cable and the data cable together with a strap tie
that is provided, as shown in Figure 7.
Figure 7. Tie Together the Cables with the Strap Tie
Note: Please secure the cables with the strap tie to avoid unexpected RMFBU2 Cache-offload Module
cable detaching from the RAID module during the system transportation.
5. Install the server system cover back and connect the power cords. See your server system
documentation for instructions.
Intel
®
Integrated RAID Module RMS25PB040, RMS25PB080, RMT3PB080
1. Insert the four barrel standoffs into the matching holes in the server board. To locate the
matching module card slot on your server board, see your server board documentation. The
Intel
®
Server Board S2600IP is shown for illustrative purpose. Actual standoff hole
locations could be different (see Figure 8).
Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2 User’s Guide 7