Quick Integration Guide

Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX Quick Installation Guide 37

9 Booting the system

There are two ways to boot your system: Not booting from Intel

RAID SSD Cache

Controller

and booting from Intel

RAID SSD Cache Controller.

Booting from a device not managed by a Intel

RAID

SSD Cache Controller

Boot system and install Windows driver

After installing the Intel

RAID SSD Cache Controller, boot the system by turning it on. For

detailed information, see chapters 5 and 6 of this document.

Booting from a device managed by a Intel

RAID SSD

Cache Controller

This section contains information on how to configure your system to boot from a device

managed by a

Intel

RAID SSD Cache Controller. This can be done using the WebBIOS

utility.

Using WebBIOS to check Nytro Cache Virtual Drive Auto-

configuration

To start the WebBIOS configuration utility, perform the following steps:

1. When the host computer is booting, press and hold down the Ctrl key and press the

H key when the following text appears on the dialog:

Intel Corporation Press <Ctrl><G> for WebBIOS

The Controller Selection dialog appears.

2. If the system has multiple Intel

RAID SSD Cache Controllers, select a controller.

3. Click Start to continue. The main WebBIOS Configuration Utility dialog

appears.