Hardware User Guide

10 Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX User Guide
Figure 4. Example of an Intel
®
RAID SSD Cache Controller
RCS25ZB040/RCS25ZB040LX Board Installation and Cabling
7. Secure the card to the server’s chassis. Install the bracket screw, if applicable, or
engage the server retention mechanism to secure the card to the server’s chassis.
8. Connect SAS or SATA devices to the Intel
®
RAID SSD Cache Controller
RCS25ZB040/RCS25ZB040LX. Make sure that the cable you use conforms to all
specifications.
9. Perform a safety check. Make sure the cables and card are installed correctly, then
close cabinet.
10. Reconnect the AC power cord to the server.
11. Turn on the power to the server. The server powers-up and auto configuration
creates a Nytro Cache Drive Group 0, RAID 1, Write Back configuration.
Intel
®
RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX installation is
complete.
Detailed Installation of the Intel
®
RAID SSD Cache
Controller RCS25ZB040/RCS25ZB040LX
This section provides detailed instructions for installing your Intel
®
RAID SSD Cache
Controller RCS25ZB040/RCS25ZB040LX.
1. Unpack the Intel
®
RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX.
Unpack and remove your Intel
®
RAID SSD Cache Controller
RCS25ZB040/RCS25ZB040LX. Inspect it for damage. If it appears damaged, or if
any of the following items are missing, contact your Intel
®
Customer and Technical
Support representative. The Intel
®
RAID SSD Cache Controller
RCS25ZB040/RCS25ZB040LX is shipped with the following items: