Specification Update

Enterprise Platforms and Services Marketing Monthly Specification Update
17
Status This issue may be fixed in a future BMC release.
Workaround None.
35.
Cannot enter LSI* 9200 family card POST configuration menu
Problem When whole new board/node first boots with LSI* 9200 family card, the LSI
setup menu cannot be entered during POST.
Implication The keyboard is not responsive during LSI card POST.
Status This issue may be fixed in a future BIOS release.
Workaround Performing BIOS jumper reset (BIOS Default jumper) can eliminate this issue.
36.
The Activity/Link LED of the Intel® I/O Expansion Modules may not be
solid green
Problem The Activity/Link LED (on the left side) of the following Intel® I/O Expansion
Modules may not be solid green when there is active connection
 Dual Port Intel® X540 10GbE I/O module AXX10GBTWLIOM and AXX10GBTWLHW
 Dual Port Intel® 82599 10GbE I/O module AXX10GBNIAIOM.
Implication The LED may keep off instead of solid green. Users cannot figure out whether
an active connection is established through LED behavior.
Status This issue was fixed with new EEPROM cut in at factory, see PCN112163 for
more details.
Workaround None.
37.
With Intel® Storage Upgrade key installed, system may not recognize the
Intel® Integrated RAID mezzanine modules.
Problem With Intel® Storage Upgrade key installed, system may not recognize the
Intel® Integrated RAID mezzanine modules.
Implication The Intel® Integrated RAID mezzanine module could not be detected in BIOS
setup and the OpROM will not be loaded.
Status This issue may be fixed in a future BIOS release.
Workaround Use PCIe based Intel® Integrated RAID modules.