Service Guide

Hardware Installations and Upgrades
80 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Removing the Intel
®
RMM4 Lite
Pull up the RMM4 Lite module to remove it from the motherboard.
Removing the Intel
®
RMM4 NIC
1. Unplug the cable from module and server board.
2. Remove the screws and remove the module from the server chassis.
Installing and Removing the Intel
®
RAID Smart Battery
Installing the Intel
®
RAID Smart Battery
1. Connect the cable between the BBU and the RAID card. For details, see Intel
®
RAID Smart Battery User’s
Guide.
2. Locate the mounting holes inside the chassis.
3. Align the tabs on the plastic battery holder with the mounting holes in the chassis and slide the plastic
battery holder until the tabs engage with the mounting holes.
Figure 108. Installing the Intel
®
RAID Smart Battery
Removing the Intel
®
RAID Smart Battery
1. Pull the tab until the tab is disengaged from the chassis cut.
2. Slide the battery from the server chassis side wall and move it out of the opening in the fan bulkhead.
3. Lift the battery up to remove it from the server chassis.