Service Guide

Hardware Installations and Upgrades
68 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Figure 85. Installing Hard Disk Drive – Installing 2.5” HDD
4. With the lever open, insert the hard disk drive assembly into the chassis (see letter A). Push in the lever to
lock it into place (see letter B).
Figure 86. Installing Hard Disk Drive – Inserting 3.5” HDD assembly
Installing Hot-swap Hard Disk Drive into 2.5” Hard Drive
Carrier
CAUTION
The 2.5" hard disk drive can be a SSD or SAS and SATA. Refer to your server board
or system documentation to determine SSD/SAS/SATA support for your server
system.
1. Remove the drive carrier by pressing the green latch to unlock (see letter A). Pull out the black lever and
slide the carrier out (see letter B).