Service Guide

Hardware Installations and Upgrades
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 65
5. Remove the 8x2.5” Hot-swap Hard drives cage. For instructions, see “Removing 8x2.5” Hot-swap
Hard Drive Cage Assembly”.
6. Remove the screw on the backplane (see letter A).
7. Push the backplane (see letter B) and remove the backplane from the cage (see letter C).
Figure 80. Removing 8x2.5” Hot-swap Backplane
Installing 8x2.5” Hot-swap Backplane
1. Attach the backplane to the back side of the hot-swap drive cage and make sure the hooks on the
cage are inserted in the backplane holes (see letter A).
2. Push the backplane (see letter B) and secure the backplane with the screw (see letter C).
Figure 81. Installing 8x2.5” Hot-swap Backplane
3. Install the 8x2.5” Hot-swap Hard drives cage. For instructions, see “Installing 8x2.5” Hot-swap Hard
Drive Cage Assembly”.
4. Install the front bezel. For instructions, see “Installing the Front Bezel (Pedestal Only)”.