Service Guide

Hardware Installations and Upgrades
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 39
6. Install the fixed fan in the corresponding fan bracket (see letter B).
Figure 47. Installing the Fixed Fan
7. Connect fan power cable to the server/workstation board. See the Quick Start User’s Guide or
Service Guide provided with your Intel
®
server/workstation board for appropriate connection location.
Removing and Installing the Hot-swap Fan
/
NOTE
This procedure applies only to the Intel
®
Server System P400IP family with hot-swap fan configuration.
Removing the Hot-swap Fan
1. Observe the safety and ESD precautions at the beginning of this book.
2. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
3. Press latch on fan and pull on handle to remove hot-swap fan from chassis.
Figure 48. Removing Hot-swap Fan